Welder

Company: Trillium Flow Technologies
Location: Fresno
Posted on: September 8, 2023

Job Description:

Trillium Flow Technologies, founded on a legacy of premier products and service, provides mission-critical valves, pumps, and aftermarket services in oil and gas, power generation, water and wastewater, and general industry, with an unparalleled focus on specific industry needs.

Business Need / Purpose of Role:

Under the direction of the Fabrication Supervisor, plan and perform a normal range of welding operations on pump component weldments.

Objectives & Measurement:

• Perform a normal range of SMAW (stick), GMAW (Mig), and GTAW (Tig) welding operations on a variety of pump component weldments such as discharge heads, flanged columns, pump barrels, motor stands, etc.; fabricated jigs and fixtures, plant repairs, and maintenance, and casting repairs. Weld in all positions for structural, mechanical and limited pressure containment requirements. Welds are subjected to sophisticated test and inspection requirements that involve die penetrant, magnetic particle and hydrotesting under commercial and high pressure ratings
• Materials processed include various grades of carbon and alloy steel, aluminum, bronze and cast iron. Equipment used consists of overhead bridge crane, jib boom, suspended automatic welders, plasma and oxy-acetylene torch cutters, universal welding positioners, horizontal pipe rolling fixture, specialized tack welding fixtures, endless band saw, a variety of weld wire in coils, spools, or straight lengths, applicable flux materials and vibratory stress relieving equipment
• Fabricate holding fixtures, as required, with consideration to weldment dimensional tolerances and allowances for spring of material. Interpret drawings and Job Operation Listings to determine fixture and welding requirements. Select welding wire and tips appropriate to work requirement, and set current, amperage, gas pressures and related controls. Set up work on table, floor, stand, positioner, or prescribed fixture. Secure with blocks, clamps and related holding devices to tack and weld in accordance with specifications. Use care to lay a smooth bead, attain proper penetration and fusion, avoid distortion, and dress welds as appropriate. Repair welds after test and inspection, as assigned, in accordance with applicable specifications and procedures
• Proficient in all welding procedures & operations as determined by the supervisor
• Detect and report faulty operation, defective material, questionable drawing requirements and unusual conditions to proper Supervisor. Perform work of acceptable quality requirements
• Maintain a working area in a neat and orderly condition
• Complete time and production reports or enter the prescribed information into a designated data input terminal
• Perform other duties as assigned
  
  Job Knowledge / Education and Qualifications :
  
  Education/Experience:
  
  • Proficient in welding operations
  • Must be able to read blueprints
  • Knowledge of various welding techniques, including of SMAW (stick), GMAW (Mig), and GTAW (Tig)
  • Must be flexible on shifts (day and night)
    
    Language:
    
    Ability to read, and write.
    
    Mathematical Skills:
    
    Basic math.
    
    Reasoning Ability:
    
    Ability to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems. Ability to deal with nonverbal symbolism (formulas, scientific equations, graphs, musical notes, etc.) in its most difficult phases. Ability to deal with a variety of abstract and concrete variables.
    
    Computer Skills:
    
    The incumbent should have knowledge of the following software: Basic Computer Knowledge.
    
    Physical Requirements:
    
    Sit, walk and stand for eight or more hoursLift, push, and pull up to 50 lbs.
    
    Work Environment:
    
    The noise level in the work environment is usually quiet. In certain areas of the facility personal protective equipment (PPE) may be required, including safety glasses and steel-toed shoes, and ear plugs.
    
    Teamwork -The ability to work collaboratively with others toward mutual objectives.
    
    Innovation - Displays original thinking and creativity; meets challenges with resourcefulness; generates suggestions for improving work; develops innovative approaches and ideas; presents ideas and information in a manner that gets.
    
    Position Type: Hourly/Non-Exempt
    
    Compensation Range: $23.00 - $32.00/Hour
    
    Trillium Flow is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Trillium Flow is a background screening, drug-free workplace.

Keywords: Trillium Flow Technologies, Fresno , Welder, Other , Fresno, California